Scissor car lift Atlant
Single-scissor hydraulic car lift
A single-scissor PANDA LIFT ATLANT car lift is the easiest and most reliable electro-hydraulic lifting platform to operate.
A single-scissor ATLANT car lift is used in case of lifting height of up to 4 meters and platform size not exceeding 7×7 meters, while maintaining the minimum depth of the pit.
Application of this type of equipment is appropriate in case of transporting one car within one floor, for example, for underground garage in a country house.
A large safety margin of this design allows a flexible configuration of technical parameters of the hoisting mechanism by changing the size of the platform, lifting height and lifting capacity.
The individual roof options allow an optimal use of the platform space and ensure structural strength, even when a second car is parked above it.
We will send you latest version of the drawings with all parameters and technical data of the lifts.
PHOTOS AND VIDEOS OF Atlant CAR LIFT
Check out our installed Atlant lift
The automatics of the car lift are synchronized with automatic garage doors and sliding doors.
Load capacity 3000 kg
Platform dimensions 5600 x 2 600 mm
Lifting height up to 3,600 mm
The status of all doors and gates in the room, the status of the correct placement of the car on the platform, the status of the lifting platform (1st floor / 2nd floor / in motion), as well as information about the possible overload of the platform and the need to carry out periodic maintenance are given to the dispatching post.
THE COST
We will send you a price quote by e-mail
By using this website, you accept the usage of cookies
| Standard platform dimensions (L x W) | 5,30 x 2,50 m. or 5,30 x 2,50 m. |
| Maximum lifting height | 4,00 m |
| Lift height in closed position | 0,55 m |
| Load capacity | 3 t. (standard), up to 20 t. (optional) |
| Lifting speed | 3 – 15 cm/sec. |
| Electric motor power | 4 – 15 kW (depending on load capacity and lifting speed) |
| Network Voltage | 220 / 380 V |
| Metal Coating | RAL Coating / Galvanizing, 75 µm |
| Weight | 3 500 kg |
| Double rack lifting mechanism* | Delivered totally assembled (racks, cylinders, platform) |
| Standard colors coating | RAL 9006 and RAL 7016 |
| Platform bottom surface* | Galvanized checkered plate |
| Hydraulic cylinders | 2 pc. with safety valves |
| Mounting set | Mechanical or chemical fastening anchors |
| Hydraulic unit | Electric motor 7,5 kW, 380 V current, three-phase current |
| Hydraulic hoses (HPH) | ANCHOR with double reinforcement (mft. in Italy) |
| Electric control panel | Based on Siemens programmable controllers |
| Wall-mounted control panels | 2 pcs. with access key, STOP button and blinker light |
| Overload sensor | 1 pc. |
| Documentation | Conformity Certificate, Equipment Data Sheet, Assembly Instructions, Operation and Maintenance Manual |
| Modification of platform dimensions according to customer’s specifications |
| Change of platform load capacity according to customer’s specifications |
| Load-bearing or protective roof on 2 / 4 pillars |
| Perimeter sensor, presence sensor and vehicle position sensor on the platform |
| Fencing of the platform according to the customer’s specifications |
| Customized RAL painting or hot zinc plating (galvanizing) 75 µm |
| Sensors for monitoring the perimeter, presence and position of the vehicle on the platform |
| Human presence on the platform option (control panel with a the function to communicate with the dispatcher) |
*** The platform dimensions, load capacity, height and lifting speed can be changed according to customer specifications.
